|
CEN Racing is proud to introduce an all new one of a kind, purpose
built mini nitro touring car. The MG16-TC has much more than speed,
durability, and great handling, it has character. The MG16-TC was designed
for hobby enthusiasts of all ages and skill levels. The MG16-TC does not
discriminate when it comes to having fun. Driving the MG16-TC brings
endless hours of fun and excitement. Experience the one of a kind nitro
touring car that offers more nitro and more fun than any other mini nitro TC
car in the market!
Full
time shaft driven 4wd makes the MG16-TC handle like a dream while backed up
with a powerful 2.5cc nitro powered motor that screams down the straightaway
and powers out of turns. Burn some rubber with the touch of your
fingertip! The MG16-TC is fully (RTR) Ready To Rock and includes the fully
digital and highly advanced Skyion radio system. Whether you’re on the
track or in your neighborhood the MG16-TC will meet and exceed your demands,
compared to any other mini nitro touring car in the world! H.I.C.- High Impact Composite
CEN Racing is always striving to think outside of the box to
bring hobby enthusiast the very best product available. We understand what
the hobbyist seeks and expects in a product because we too are hobby
enthusiasts. Our latest development is our state of the art H.I.C.
or High Impact Composite. This composite has been proven and tested to be
the most durable composite of its kind. After months of testing our
engineers and research and development department have constructed the
H.I.C. material that is exclusively available with the MG series
vehicles. The composite is extremely flexible which will give upon impact.
Not only does the H.I.C. material work effectively in that is
doesn't snap or break, but it give the vehicle tons of traction and
stability as well. We understand what the most important aspects to
bashing, and jumping your r/c vehicles are, having fun and driving them.
With the new H.I.C. material you will experience more driving
time which will lead to more fun which is what the hobby is all about!
|
 |
| The MG16 with its .stump pulling 2.5cc pull start
engine gives the MG16 blistering acceleration. With the MG16's awesome power
to weight ratio, you'll still be able to smoke the larger 1/10th
scale trucks in a drag race! Don't be afraid that the power of the MG16
will just lead to you spinning your wheels, with the full time 4WD you won't
find yourself short of grip to get the power to the ground. Stop by your
local hobby shop and check out CEN Racing's newest sidekick, the MG16! |
 |
Tired of pull
starting your engine? CEN Racing is now offering an
alternative. The Roto-Tech Starter system for your MG Nitro
Vehicle. With this device, your car will start in no time,
everytime.
G70358 Roto-Tech Starter
Buy
it Now
G70431 Ni-Cd Battery (7.2v-1800mAh)
Buy it Now
|
 | The MG16 is full time
shaft driven 4WD with a unique front bevel gear differential coupled with a
traditional 3 gear transmission in the rear. Notice the unique molded
chassis, the center cutout allows for the drive shaft to at the same level
as the chassis itself, this allows for the MG16 to have a lower overall CG
for enhanced handling prowess. Maintenance on the MG16
is a breeze. With the simple chassis layout getting to the transmission and
differentials are a piece of cake. Fixed camber links and toe links cut
down on the adjustments letting you focus on the more important side of RC,
FUN!!
Notice
the center drive shaft, its fully protected by the sides of the MG16
chassis. With the MG16 you won't have to worry about readjusting belts,
the shaft driven power With the full time shaft driven 4WD handling the
horsepower that the 2.5cc recoil start engine dishes out is no problem!
And if you're skeptical that the 4WD drivetrain isn't enough, CEN SPORT has
equipped the MG16 with a slipper clutch to provide enhanced traction and
power transfer
*Comparison picture between MG16-TC next to a standard size 1/16
Truck |
 |
 |
 |
|
Equipped
with 75cc fuel tank and lightweight chassis, the MG16 provides over ten
minutes of tire shredding fun on a tank of nitro.
Less refueling and more Driving! |
Aside from performance CEN
SPORT's engineers designed the MG16 to be easy to service as well. Remove
8 screws and the front differential is in your hands. Just unscrew
another 8 screws for the rear transmission and you have both front and rear
differentials in your hands. |
Knowing
that the MG16 will see action in the dirt and mud, CEN SPORT designed the
MG16 with a fully sealed radio box. Keeping your electronics safe and sound
is critical to having Nitro RC fun day in day out |
|
 |
 |
|
High
Performance Oil Filled Shocks - Adjustable oil filled coil over
shocks providing the best on track performance with unlimited
adjustability |
Innovative transmission features no differential output cups! The
dogbones actually engage an internal hex shaped differential output
shaft. There’s no output cups to wear out!! |
MG16
features a ball bearing supported transmission coupled with a
slipper clutch to maximize power transfer and enhance traction |
| Using resilient composites
instead of aluminum, the MG16 combines lightweight with rugged
durability. To reinforce the chassis, CEN SPORT designed the chassis with
reinforcement gussets underneath the chassis. A composite transmission
brace ties the transmission to the chassis. Without this brace the lateral
and torsional forces caused by the engine would lead to stripped spur gears,
broken engine mounts, and leading to a ruined day of nitro fun. The
MG16-UNIT's
arms have been molded out of a composite that allows for increased crash
durability but at the same time it is not so flexible that it does not let
the suspension do its job.
|
|
| Part of the fun
of owning an RC car is being able to customize it. The
MG16 doesn't
disappoint. Hop-up potential?? Well the MG16 can use standard size 1/10th
scale tires and wheels, so you won't find yourself short of new kicks for
your MG16. Along with alloy shocks, and a wheelie bar, there's plenty of
upgrades that you can customize your MG16.
|
| Completely Ready to Run
|
Skyion DSX Radio System |
Lighting fast Acceleration
|
Full time shaft driven 4WD
|
| Ball bearing supported |
Reinforced composite chassis components |
Powerful 2.5 Engine |
High flow manifold with rear exit exhaust |
| 75cc fuel tank with filter |
Built in servo saver |
Big Bore Oil Filled Shocks
|
P & D Body |
|
Sealed receiver and
battery Compartment |
Single Speed Transmission with Slipper Clutch
|
Adjustable Suspension geometry |
Adjustable toe-in and camber
|
| High Impact front bumper
|
Stylish 2.2" offroad wheels |
High grip v-treaded off
road tires |
Compatible with 1/10
parts, Unlimited upgrade potential!! |
|
|
ˇ@ |
|
